Picture above: Carl F Groupco’s Technical Manager John Mitchell presents samples of colours and finishes for the Glazpart Link Vent range of trickle ventilators.
The high performance Glazpart Link Vent range of plastic injection moulded trickle ventilators has been added to Carl F Groupco’s hardware catalogue. Designed to meet the stringent requirements of today’s building standards, the Link Vent MK 2 is available in two variants – the 2500EQA and 5000EQA.
Drawing on over 30 years’ experience in the design and manufacture of plastic glazing accessories for the fenestration industry, and specialised knowledge of ventilation products, the Glazpart Link Vent range offers a number of key features including one of the highest decibel ratings for non-acoustic vents. The ventilators can also achieve higher performance and improved EQA on smaller vents.
The 2500EQA can be installed to replace both 2000 and most 4000 vents: it is the same size as typical 2000 vents and has the optimum EQA to replace most 4000 vents. The 5000EQA can be used to replace two 4000 ventilators, meaning fewer vents to fit and rout. Supplied with fixing clips already fitted, and without end caps, ensures easy push fitting in seconds. Accurate, level fitting is also achieved as clips automatically centre the vent in the rout and for screw fixing, the fitted screw caps are easily removed and replaced.
The Link Vent is available in a large range of solid colour or wood grain finishes. For maximum colour flexibility, internal and external parts can be purchased separately.
Carl F Groupco also features Glazpart packers including flat packers, flexible corner wedges and klip frame packers in the tools and consumables section of its catalogue.
Carl F Groupco Limited Tel: 01733 393330 www.carlfgroupco.co.uk
Follow Carl F Groupco on Twitter using the handles @Carl_F_Groupco and @_SmartSecure